You are the owner of this article.
Jerritt Canyon celebrates completion of new water treatment plant
featured

Jerritt Canyon celebrates completion of new water treatment plant

{{featured_button_text}}

The week before Thanksgiving, people who had been involved with the construction of the new water treatment plant at the Jerritt Canyon Gold Mine north of Elko gathered for a ribbon-cutting ceremony and an expression of gratitude.

“We appreciate everybody’s efforts,” Environmental Manager Mirinda Jones said. “We totally understand how much work you guys put in.”

“This was pretty substantial,” Jones said. “I know there were a lot of times when all of you were feeling the hammer just as much as we were. Genuinely … thank you for the hours you all put in.” She also thanked the family members of those who worked on the project, who also felt the effects of all the work put into the plant.

The group was gathered under a tent in front of the big water treatment plant building filled with a complex array of piping, tanks, filtration systems, and other equipment. The $15 million project, which had been in planning and construction phases for years, was finally commissioned and up and running, treating water from the nearby process solution reservoir.

Jerritt Canyon water treatment plant - Jones thanks crowd

At the ribbon cutting for the new water treatment plant at the Jerritt Canyon Gold Mine in November, Jerritt Canyon Environmental Manager Mirinda Jones, center, thanked everyone for all the work they put into its construction. Project Manager George Tinkorang is on the left and Jerritt Canyon General Manager Kevin Small is on the right.

“This is huge, not just for us as a company, but really the industry,” Jones said. “You’re treating water that is so contaminated and so concentrated with minerals, and discharging water that’s so pure, we encourage you not to drink it.

“The efforts that went into that will create longevity here for who knows how many years.”

Jerritt Canyon water treatment plant

The new water treatment plant at the Jerritt Canyon Gold Mine north of Elko is a technically complex facility which was designed to treat water from the mine’s milling process which has been held in reservoirs and has a high concentrate of contaminants.

Kevin Small, Jerritt Canyon general manager and vice president of operations, said “I’ve worked at a lot of places with water treatment plants and this is probably one of the most technically complex plants I’ve ever seen … the reason being, we have 20 years of concentrated contaminants in our water.”

After all the thanks, various groups of people who worked on the project gathered in front of the plant for photos, and then there was a ribbon cutting with a pair of giant scissors in honor of the work accomplished.

Jerritt Canyon water treatment plant - ribbon cutting

A big group of people involved with the construction of the new water treatment plant at the Jerritt Canyon Gold Mine north of Elko gathered on Nov. 21, 2019 for a ribbon cutting and a celebration of the completion of the plant. In the center, JCG Project Manager George Tinkorang and JCG Environmental Manager Mirinda Jones start to cut the ribbon.

Before the ribbon-cutting event, Project Manager George Tinkorang, who has worked at the Jerritt Canyon Mine since February 2011, talked about how the new water treatment plant works and what it will accomplish.

Tinkorang said Linkan Engineering was the design engineer for the project.

Jerritt Canyon water treatment plant - Team of four

Many groups of people who helped with the planning and construction of the new water treatment plant at the Jerritt Canyon Gold Mine gathered for photos before the ribbon in front of the new plant was cut. From left are JCG Project Manager George Tinkorang, JCG Maintenance Planner Chris Olive, who led the in-house piping installation team, Linkan Engineering President Sam Billin, the engineer of record and general contractor, and JCG Environmental Manager Mirinda Jones.

“They helped us through all of this process, right from the permitting stage up through construction and as-built submittal and the commissioning led by Linkan’s Process Engineer, Jason Wheeler,” Tinkorang said. “Jerritt Canyon’s piping construction team led by Chris Olive and the certified water operators—Dan Romero, Brent McEwen, Evan Champion, Thomas Knight and William Goss—did a fantastic job taking on a huge challenge during the last several months prior to final commissioning and startup.”

Other vendors involved with the project included Water Surplus, who designed the reverse osmosis system, WesTech, who designed the ultrafiltration system along with both the clean-in-place skids for the UF and RO systems, and Nexom (formerly Blue Water), who designed the inclined plate clarifier.

Jerritt Canyon water treatment plant - People looking around

The people who gathered for the ribbon cutting ceremony for the new water treatment plant at the Jerritt Canyon Gold Mine north of Elko in November took a look around the new plant.

The plant is treating water from the mine’s milling process. When the tailings leave the mill, the solids settle, and the supernatant – the liquid above the settled residue – is pumped into the reservoirs.

“We currently have about 480 million gallons of water in the reservoir that needs to be treated,” Tinkorang said. “And that was the goal for this plant. We have built ponds and have been accumulating water, which the Nevada Department of Environmental Protection doesn’t want us to keep doing.”

“This treatment plant eventually will bring Jerritt Canyon into a zero-balance water inventory for the first time in the mine’s 30-year-plus history.”

Over the years, Tinkorang said, the contaminants in the reservoir water has become highly concentrated as supernatant stored in the evaporation pond has been circulated through the mill.

Jerritt Canyon water treatment plant - People visiting

Before the ribbon cutting ceremony for the new water treatment plant at the Jerritt Canyon Gold Mine in November, people spent some time visiting in the new plant.

The water treatment facility was designed to process about 1,000 gallons per minute. Through the first quarter of 2020, it may process about 800 gpm as Jerritt Canyon works through the bugs in the system and deals with the first freezing temperature efforts of the entire systems.

Tinkorang said the plant will eventually get caught up and treat water faster than it is being produced by the milling process. In the meantime, the water treatment plant has been treating highly concentrated supernatant from the water storage reservoir.

“NDEP is going to be excited when that reservoir is empty,” Tinkorang said. “And we are lowering the levels already.”

“The water treatment project commenced in 2016 and a building foundation was constructed at that time,” Tinkorang explained. “However, there were several delays due to funding issues. Additional construction work was completed in mid-2018. A decision was made in late 2018 to move forward with the project again because our water levels were quickly rising.”

Instead of having contractors complete the project, a decision was made to have the mine’s maintenance team do all the piping, which took about six months.

“When all the piping was installed and the plant was commissioned,” Tinkorang said, “we determined that the water in the reservoir had become more concentrated with contaminants because the system was designed a few years earlier, and some adjustments had to be made. Reverse osmosis recovery reduced from 69% to 50% during commissioning due to worsened water quality. WaterSurplus field reps had to take out the high-energy recovery pressure exchanger devices that had been initially installed to exchange some of the high pressure within the system. This had helped reduce the initial pressure and lowered the operating/energy cost needed to operate the pumps in the reverse osmosis part of the system.”

Jerritt Canyon water treatment plant - Reverse osmosis system

The reverse osmosis system is the core of the new water treatment plant at the Jerritt Canyon Gold Mine. These tubes house the reverse osmosis system’s membranes.

The reverse osmosis is the core of the water treatment process, but the water starts out going through pretreatment steps in order for this process unit to be able to do its job.

First, sodium hypochlorite (NaOCl) and sodium hydroxide (NaOH) are added and allowed some retention time for heavy metal oxidation and pH adjustment up to about 9 to occur, respectively. Then ferric chloride (FeCl3) and sodium dimethyldithiocarbamate (NaDTC) are added for heavy metal absorption/coagulation and mercury precipitation, respectively. A total of 10 chemicals are used in the treatment process.

The water is then pumped into an inclined plate settler for solids separation, where hyperfloc AF-304 polymer is added to enhance flocculation and settling. The inclined plate settler is a clarifier designed to provide a large effective settling area with a relatively small footprint. The heavy metals and settled suspended solids are pumped to the tailings impoundment. Antiscalant and FeCl3 are added to the clarified water leaving the inclined plate settler for scale control and further solids coagulation, respectively. This results in water with less than five nephelometric turbidity units.

From this point, the water is pumped through an ultrafiltration system, which is a series of big vertical racks in the water treatment building. Sulfuric acid (H2SO4), sodium bisulfite (SBS) and antiscalant are added to the UF filtrate to provide pH adjustment down to around neutral, a chlorine neutralizer to protect the reverse osmosis membranes, and a scale control, respectively. Then the water is pumped through the reverse osmosis system.

The reverse osmosis system currently has an operating pressure of about 500 to 600 pounds per square inch under normal temperature conditions. All the skid feed piping used are duplex 2205 stainless steel in order to handle the high pressure up to an operating pressure of 800 psi. All the permeate pipelines are 316L stainless steel.

“After the reverse osmosis, the water goes to an ion exchange system to help polish any excess mercury. Historically, water from the mill had high mercury levels, but mercury is now being captured upfront in the milling process, so mercury levels have gone down drastically,” Tinkorang said.

The treated water is then pumped into the finished water tank and finally conveyed into injection wells which are approximately 1,200 feet deep so the purified water goes back into the aquifer.

Drinking water can have total dissolved solids of about 500 parts per million. Some jurisdictions allow as high as 1,000 ppm. The water coming into the Jerritt Canyon water treatment plant from the reservoir, Tinkorang said, has total dissolved solids of about 20,000 to 30,000 ppm. After the water has gone through the entire treatment process, it has total dissolved solids of less than 500 ppm.

Reverse osmosis produces purified water and a concentrate. The Jerritt Canyon water treatment system was originally designed to have a 70 percent recovery, with 70 percent of the water coming out purified. However, because of the increased concentration of contaminants in the reservoir water over the past few years, the reverse osmosis is currently achieving about 50 percent recovery. The brine/concentrate which is a product from the reverse osmosis system has total dissolved solids of about 40,000 ppm, and is currently discharged into the lined evaporation pond. A brine pond is planned to be constructed in 2020/2021.

Next door to the new process water treatment plant is a $6 million underground mine dewatering water treatment plant which was constructed in late 2016. The mine dewatering water treatment plant is less complex than the treatment of the water from the milling process water treatment plant, since it deals with only about four major contaminants rather than roughly 15.

Dewatering at the mine is currently on hold. In the dewatering treatment plant there are 25 horsepower pumps which were going to be used to pump water from the new water treatment plant to an area called the lower injection field. However, water from the new water treatment plant is currently being lifted by 300 horsepower pumps to a booster pump station and then discharged into the upper injection field, where it flows into the bedrock.

The new water treatment plant has a control room that houses the SCADA (supervisory control and data acquisition) system. On one wall of the room is a large cabinet filled with rows of circuits with instrumentation and control wires.

“This is the brain of the treatment plant,” Tinkorang said.

Jerritt Canyon water treatment plant - The brain

The control room in the new water treatment plant at the Jerritt Canyon Gold Mine has a large cabinet which houses the “brain” of the plant.

A desk with two human machine interface monitors sit in front of windows that look out at the water treatment plant equipment. Plant performance is monitored from the HMI screens.

“With this overview screen we are able to see what is happening at a glance,” Tinkorang said. “The operators go around and do checks on a very frequent basis to confirm what we’re seeing.”

“We have a very rigorous monitoring protocol with this project,” Tinkorang said. “Thanks to Zola Adje of the environmental engineering staff for keeping us up to date with the requirements of the UIC permit. The Nevada Underground Injection Control program requires some serious monitoring. We want to make sure we are discharging to permit limits on a constant basis, and that we are meeting all our requirements. So we have sampling locations where we monitor with all in-line analyzers as well as hand held meters.”

Tinkorang said he also wanted to thank Dwayne Ward and Tracy Duncan with HR, Cole Williams and his team with security and Neil Jenkins with IT for putting together and/or assisting to make the ribbon-cutting ceremony a success.

4
0
0
1
0

Get local news delivered to your inbox!

* I understand and agree that registration on or use of this site constitutes agreement to its user agreement and privacy policy.

Related to this story

Entering the Lee Smith Mine underground mine through a portal reminds me of how science programs render falling through a wormhole. Because I’…

Get up-to-the-minute news sent straight to your device.

Topics

News Alerts

Breaking News